MedicAir  has chosen to install RFID solutions from InfinityID to manage without risk of error or loss the traceability of all its medical devices, especially liquid and gaseous oxygen cylinders

By replacing normal barcode labels with smart RFID tags placed directly on the cylinders, it is now able to automatically identify goods entering and leaving its warehouses and storage facilities.

This innovative system provides a real-time view of the status of products, always being certain of how many cylinders are in the warehouse and how many are at the customer’s premises.

Thanks to the hand-held RFID readers supplied to the operators, goods are managed in a massive way, accurately identifying thousands of articles entering and leaving the depots and warehouses, thus avoiding the possibility of losing products.

The MedicAir operator only has to ensure that the process is started. Everything else is taken care of by LOGiC, the InfinityID software, which shows in real time what is on the incoming and outgoing load, communicating the data to the management system.

Having ascertained that everything corresponds to the order, the shipment can be approved, safe in the knowledge that there will be no errors.

Metal Work chose to install an InfinityID solution in order to have more control over shipments and zero errors at the outbound end. By replacing normal barcode labels with RFID tags, it was able to identify packages automatically and verify that outgoing pallets were prepared correctly, avoiding time-consuming manual quality checks.
The loading bays of Metal Work’s warehouses have been equipped with special RFID portals to read the outgoing goods, allowing the batch to be weighed and its conformity checked.

The operator only has to ensure that the process is started via the terminal. Everything else is taken care of by Logic, the InfinityID software, which shows the count in real time and signals the need for the operator to check for inconsistencies.
Once it has been ascertained that everything corresponds to the order, the portal is opened and the shipment can be completed, safe in the knowledge that there will be no errors.
This system was implemented in the company in just one month and has enabled Metal Work to save time on quality control and to reduce complaints about nonconforming goods to zero.

Givova required a system that would give them greater control over the goods during inbound, outbound and inventory operations. They also needed to control and manage the goods within the warehouse.

How did we solve these problems? Each article was equipped with an RFID tag with which its movement within the warehouse can be automatically tracked.

Thanks to the RFID portal, goods management now takes place automatically, with the exact number of thousands of articles entering and leaving being indicated. In addition, we have optimised the picking and packing phases through the use of tablets for picking articles and reading tables for preparing boxes.

The S.I.D.A.T. project was born out of the need to digitise work that was previously carried out through manual operator support, in order to achieve time and cost savings, and a reduction in errors.

S.I.D.A.T. has not only achieved accuracy in counting goods, but has also speeded up and simplified the process.

The company significantly reduced its order preparation time, achieving an effective saving of 75% in the preparation of its shipments.

The benefit was immediate, now thanks to RFID technology, the company went from processing one order within 10 minutes to processing four orders in the same time frame.

The project arose from the need to digitise work that was previously carried out through manual counting and writing by the operator, in order to save time, costs and reduce errors.

In doing so, Sorley not only achieved accuracy in counting the goods, but also made the process faster and more convenient.

This is all thanks to RFID technology that can read thousands of items without any human intervention.

With just one ‘beep’, in fact, entire packages can be read and catalogued in a short time, reducing handling errors exponentially.

Unlike before, when only a quarter of the goods were identified, as everything was done manually.

The project arose from the need to improve the inbound and outbound process, guaranteeing maximum operational efficiency for the customer.

Thanks to the installation of the RFID reading TUNNEL, we were able to track every single parcel.

In addition, the system also provides a clear reading of each item within each load before it is dispatched, and also verifies the veracity of the information.

This has led to a considerable improvement in the work process due to the speed of the RFID system, which guarantees high savings in order preparation time.

Hence the need to have a tool to quickly identify the position on the ground or at home of every single item in stock, without risk of errors.

Thanks to RFID technology and the implementation of the InfinityID Item Locator solution, when the product code is inserted on the portable device, the operator is guided with a beep to the requested item, without risk of finding the wrong product.

As a result of numerous contract processing operations, the need for a traceability system emerged more and more that would speed up administrative procedures and ensure the reliability and accuracy of the data relating to movements.

Along the sorting line, RFID read TUNNEL was inserted in order to automate the counting procedures and to verify the integrity and veracity of the information inside the package on each individual checkpoint.

RFID portals have been installed on all the loading and picking docks and on all the bays for moving goods, which are completely automatic, detect the movements of the goods drastically increasing the inventory accuracy of the article locations.